PHP stack containers¶

Apache¶

New Apache image

Since Drupal stacks 5.2.0+ Apache image wodby/php-apache has been replaced with wodby/apache with $APACHE_VHOST_PRESET=php

Apache can be configured with the following environment variables
Installed apache modules

Restarting apache as default user:

sudo httpd -k restart

See details about virtual host preset.

AthenaPDF¶

See AthenaPDF stack documentation.

Crond¶

A duplicate of the main PHP container runs with crond (instead of FPM). You can customize crontab from [Instance] > Stack > Settings page.

Mailhog¶

If Mailhog service enabled and chosen as Mail delivery service at [Instance] > Stack > Settings all outbound email will be caught by the Mailhog. You can view and release these emails from Mailhog UI, the URL can be found from Domains tab. When release specify opensmtpd in SMTP server field if you want to release emails to the default Mail transfer agent (OpenSMTPD).

MariaDB¶

See MariaDB stack documentation.

Memcached¶

You can check the status of memcached and its hits by running the following command.

watch "echo stats | nc 127.0.0.1 11211"

Nginx¶

Nginx can be configured with the following environment variables

Restarting nginx as default user:

sudo nginx -s reload

Do not gzip pages in your application

We already gzip content on Nginx side and it works faster. Having double gzip may cause issues.

Modules¶

Installed nginx modules.

PageSpeed¶

Nginx comes with mod_pagespeed which is disabled by default. To enable it add NGINX_PAGESPEED_ENABLED=1 environment variable to Nginx service. For more details see https://github.com/wodby/pagespeed.

ModSecurity + OWASP¶

Nginx comes with ModSecurity which is disabled by default. To enable it add NGINX_MODSECURITY_ENABLED=1 environment variable to Nginx service. For more details see https://github.com/wodby/modsecurity.

Custom config¶

If a config preset and available environment variables are not enough for your customizations you can use your own virtual host config:

Copy /etc/nginx/conf.d/vhost.conf to your codebase, adjust to your needs
Deploy code with your config file
Add new environment variable NGINX_CONF_INCLUDE for nginx service, the value should the path to your *.conf file (e.g. /var/www/html/vhost.conf). The specified file will be included in /etc/nginx/nginx.conf

Default virtual host preset: php.

Node.js¶

Light-weight node.js container to help you build your application's frontend. The containers comes without any global pre-installed packages, you can add them by running yarn global add PACKAGE or by running yarn in a directory with your package.json file.

OpenSMTPD¶

See OpenSMTPD stack documentation.

PHP¶

PHP can be configured with the following environment variables
Available php extensions

Environment variables¶

Variables availability

Environment variables (except ones provided by Wodby) won't be available in PHP-FPM because we set PHP_FPM_CLEAR_ENV=yes by default for security reasons. You can set it to yes to make all environment variables available in your code.

In addition to global environment variables, we provide the following variables in PHP container that you can use in your post-deployment scripts or settings files:

Variable	Description
`$APP_ROOT`	`/var/www/html` by default
`$HTTP_ROOT`	e.g. `/var/www/html/web`
`$CONF_DIR`	`/var/www/conf` by default
`$WODBY_APP_NAME`	My app
`$WODBY_HOST_PRIMARY`	example.com
`$WODBY_URL_PRIMARY`	http://example.com
`$WODBY_HOSTS`	`[ "example.com", "dev.example.org.wodby.cloud" ]`

Deprecated variables:

Variable	Instead use
`$WODBY_APP_ROOT`	`$APP_ROOT`
`$WODBY_APP_DOCROOT`	`$HTTP_ROOT`
`$WODBY_CONF`	`$CONF_DIR`
`$WODBY_DIR_CONF`	`$CONF_DIR`

Files directory permissions¶

Public files directory (symlink to /mnt/files/public) that used for uploads owned by www-data user (PHP-FPM user) by default and the default container user (wodby) has no writing permissions. So if you run a command that creates files in a public directory you will get insufficient permissions error. You can fix this problem by giving writing permissions for files directory to the owner's group (user wodby is a member of www-data group) by using one of the helper scripts:

sudo files_chmod /mnt/files/public

When you manually import files under wodby user you should change files ownership to www-data user to let PHP-FPM create new files in directories, run the following command to change the ownership:

sudo files_chown /mnt/files/public

Helper scripts scope

files_chmod and files_chown are the only sudo commands available to wodby user and can be applied only to directories under /mnt/files .

For mode details about users and permissions in PHP container see https://github.com/wodby/php#users-and-permissions

Codebase directory permissions¶

The codebase owned by the default wodby (uid/gid 1000) user. If you need to give writing permissions to PHP-FPM (www-data user with uid/gid 82) to a directory outside on public files directory you can either access a container as root user or change it from the host server (single-server infrastructure):

chown -R 1000:82 /srv/wodby/instances/[INSTANCE_UUID]/app/path-to-directory
chmod -R 775 /srv/wodby/instances/[INSTANCE_UUID]/app/path-to-directory

NewRelic¶

You can add NewRelic APM monitoring for PHP by adding environment variables PHP_NEWRELIC_ENABLED=1 and PHP_NEWRELIC_LICENSE with your license number to PHP-FPM container. Application name will be automatically set to [Wodby Application Name] - [Wodby Instance Name], if you want to change it, use PHP_NEWRELIC_APPNAME.

Profiling¶

Must know before using profiler

Both XHProf and Xdebug profiling decreases performance and increases resources usage, especially xdebug. Try to avoid using in production
Traces files take a lot of disk space and may cause out of disk space very quickly

XHProf¶

Enable XHProf extension by overriding the environment variable PHP_EXTENSIONS_DISABLE="" to your PHP container (by default, it's set to xdebug,xhprof).

Use the following example snippet to profile your code:

// Start profiling.
if (extension_loaded('xhprof')) {
    xhprof_enable(XHPROF_FLAGS_MEMORY | XHPROF_FLAGS_CPU);
}

// Code which should be profiled.
// ...

// Store profile.
if (extension_loaded('xhprof')) {
    $xhprof_out = '/mnt/files/private/xhprof';

    if (!file_exists($xhprof_out)) {
        mkdir($xhprof_out);
    }

    file_put_contents(sprintf('%s/%s.%s.xhprof', $xhprof_out, uniqid(), 'web'), serialize(xhprof_disable()));
}

Once traces files generated you can view and analyze your traces via XHProf viewer

Xdebug profiler¶

Enable XDebug profiling by adding the following environment variables to your PHP container (! xdebug env vars have changed since version 3.x):

PHP_XDEBUG: 1
PHP_XDEBUG_MODE: profile
PHP_XDEBUG_START_WITH_REQUEST: trigger
PHP_XDEBUG_TRIGGER_VALUE: 1

Add XDEBUG_PROFILE=1 param to GET or POST request (or set a cookie) you want to profile. Xdebug will generate profile files in /mnt/files/xdebug. Click Update in Webgrind to access the new information. See https://xdebug.org/docs/profiler to learn more about xdebug profiling.

Once traces files generated you can view and analyze your traces via Webgrind

Xdebug¶

Debugging locally

For using xdebug locally see documentation for local environment

Follow these steps to debug your application instance remotely with xdebug:

Enable xdebug for your instance from [Instance] > Stack > Settings
Set up forwarding for xdebug: copy Xdebug SSH tunnel command from [Instance] > Stack > SSH server (PHP) and run on your local machine
Make sure you have your IDE xdebug listener running on port 9000
Start debugging in IDE
Start your browser debug helper plugin (Chrome or Firefox) and open the page you want to debug

For xdebug troubleshooting enable logs by adding $PHP_XDEBUG_REMOTE_LOG=/tmp/php-xdebug.log environment variable to PHP container.

Xdebug troubleshooting

Enable xdebug logs to get more information by adding $PHP_XDEBUG_REMOTE_LOG=/tmp/php-xdebug.log environment variable to PHP container.

PostgreSQL¶

See PostgreSQL stack documentation.

Redis¶

See Redis stack documentation.

Drupal¶

See Drupal stack documentation.

Rsyslog¶

Rsyslog can be used to stream your applications logs. It's similar to using syslog, however there's no syslog in PHP container (one process per container). Rsyslog will stream all incoming logs to a container output.

You can use Monolog with SyslogUdpHandler to stream logs to rsyslog.

SSHd¶

A duplicate of PHP container runs with SSH daemon (instead of FPM). You can find access information on [Instance] > Stack > SSH

Public SSH keys from your Wodby profile will be added automatically for all users that have access to an instance.

Varnish¶

See Varnish stack documentation.

Webgrind¶

Webgrind allows you view and analyze Xdebug profiler output and generate call graphs for visualisation.

XHProf viewer¶

XHProf viewer allows you view and analyze XHProf traces output and generate call graphs for visualisation.